Sdu Comm Card Interface To End-User Network; Sduenetipcard Connectors For Network Interface; Sducfrelaycard Interface; Figure 11: Rj45 Connector For Ethernet Style Card - Emerson SolaHD SDUMBUSCARD Instruction Manual

4.2 SDU COMM CARD Interface to UPSk
4.2.1 The SDUENETIPCARD uses 2-port high speed RJ45 connectors for network interface.

4.2.2 SDUCFRELAYCARD Interface

the sDUCFReLAYCARD has a 1x8 Push-In style connector. Push the plastic pin and insert the wire into the hole then release to lock it in
place. each terminal position can accommodate 0.2 – 1.5 mm2 (AWG 24 – AWG 16) wire. the maximum force that should be applied on
the connector mechanism is 40 n (9lbs.).
the CF-ReLAY-CARD is design for safety extra Low Voltage (seLV) circuit applications only.
Pin 1 (BLUe)
sDU AC - A seRIes CoMM CARDs InstRUCtIon MAnUAL | 13

Figure 11: RJ45 Connector For Ethernet Style Card

Figure 12: SDUCFRELAYCARD Front Face