Psion Teklogix WORKABOUT PRO series Quick Reference Manual page 11

Note:
To maintain compliance with the FCC RF exposure guidelines, if
you wear the WORKABOUT PRO M-E, C & S on your body, use the
Psion Teklogix approved carrying case.
Use of non-approved accessories may violate FCC RF exposure
guidelines.
Emissions Information For Canada
This Class B digital apparatus meets all requirements of the Canadian Inter-
ference-Causing Equipment Regulations. When using the 802.11 radio
option, to prevent radio interference, this device is intended to be operated
indoors and away from windows to provide maximum shielding. Equipment
(or its transmit antenna) that is installed outdoors is subject to licensing.
Cet appareil numérique de la classe B respecte toutes les exigences du Règle-
ment sur le matériel brouilleur du Canada. En cas d'utilisation du module
radio 802.11, afin d'éviter toute interférence radio avec le service autorisé,
l'appareil doit être utilisé à l'intérieur, tout en tant éloigné de toute fenêtre afin
de garantir le maximum de protection. Si cet équipement (ou son antenne
émettrice) est installé à l'extérieur, il est alors soumis à licence.
Warning for Australia
The user needs to switch off the device when exposed to areas with poten-
tially explosive atmospheres such as petrol stations, chemical storage depots
and blasting operations.
Warning to Users
This product is a Class I/Class II laser product according to CDRH 21 CFR
1040.10 and 1040.11 and Class1/Class 2 laser product according to IEC
60825-1:1993+A1:1997+A2:2001
The SE1200 ALR has a maximum radiated power less than 1.4 mW; accord-
ing to EN 60825-1: 2001 it is classified as a Class 3B laser product.
Laser Warnings
For your own safety, it is critical that you comply with the
following warnings:
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE Quick Reference Guide
7