Aud (Auto-Mute/Volume Control) Button; Cty (City/Highway) Button; Volume Control - Beltronics V960/V940 Operating Instructions Manual

AUD (Auto-Mute/Volume Control) Button

k
Manual Muting of Audio Alerts
k
(Radar and SWS
Whether Auto-Mute is selected on or off in Selectable
Features, the audio alerts can be completely muted by
pressing the AUD button during an alert. The display will
briefly show
long as the signal is present. The unit will remain in manual
mute mode for approximately 1 2 seconds from the last
received alert.
Note—because Laser alerts are not lengthy or sustained,
muting is not required (see page 21)

Volume Control

k
Press and hold the AUD button to engage the
volume control; the volume will cycle high to low.
Release the AUD button when you have reached
your desired audio setting.
k

CTY (City/Highway) Button

The CTY button has four functions:
1. AutoScan
2. Highway Mode
3. City X Filtration Mode
4. City X/K/Ka Filtration Mode
AutoScan
k
VECTOR 960 and VECTOR 940 are factory shipped
with AutoScan
automatically adjust sensitivity to X and K Band Radar
whatever your driving environment. Whether driving in
densely populated urban areas or "wide open" rural
areas, AutoScan
9 9
™ )
" "
No audible alert will be heard as
Q Q U U I I E E T T
.
™ Mode
™ Mode
:
™ engaged. Autoscan
™ will automatically reject virtually all
™ is designed to