Connection Between Main Site And Remote Site; Dti Connection At Main Site; Dti Cable Connection Via Ltc Connector - NEC NEAX2000 IVS User Manual

2.3 Connection Between Main Site and Remote Site

2.3.1 DTI Connection at Main Site

(1) When using the LTC connector on BWB
Connect the cable to a CSU or directly to the Remote PIM via the MDF as shown in
38 shows an example of cable connections when the DAIA/DAIC card is mounted in the AP0 slot of PIM0.
Connection of DAIC cards between the Main PIM and the Remote PIM is available in the same manner as
the DAIA-DAIB connection
MAIN PIM
BWB
DAIA/
DAIC
Note: When the Remote PIM is directly connected without CSU, maximum distance is
1312 ft. (400 m) between the Main PIM and the Remote PIM.
CHAPTER 3
Page 62
Revision 2.0
TWISTED-PAIR
CABLE
(SHIELD TYPE)
LTC1/LTC2 CONNECTOR
MAX.656 ft. (200 m)
(0.65Φ cable)
Figure 3-37

DTI Cable Connection via LTC Connector

MDF
Note
ND-46550 (E)
Figure 3-37. Figure 3-
CSU
CSU: CONNECTION
SERVICE UNIT