2.1.4 Mounting of DAIC Card
STEP 1: Set MB switch on the DAIC card to up position.
STEP 2: Mount DAIC card in the AP slots (AP0-AP7) to the LT slot (LT09)
on the Main Site PIM0-PIM5.
A maximum of six DAIC cards can be mounted.
After mounting the card, set MB switch to down position.
STEP 3: After mounting all DAIC cards, set MB switch on DAIA card to up, and then down.
Main Site
PIM0-PIM5
DAIC CARD
CHAPTER 3
Page 28
Revision 2.0
Figure 3-8
Mounting Location of DAIC Card (Main Site)
ND-46550 (E)
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required