Table of Contents
Advertisement
• Install the PZ-8PFTA card to the PIM according to the following steps.
STEP 1: Connect the champ connectors of 25-pair cables to the PFT0 and PFT1 connectors on the PZ-8PFTA
card as shown in
Figure
3-33. Then, secure them to each other using screws and tie wraps.
PFT0 CONNECTOR
+
TO MDF
(See STEP 3:)
PFT1 CONNECTOR
+
+
+
PZ-8PFTA
25-PAIR CABLE
CHAMP CONNECTOR (Provided with PZ-8PFTA)
Figure 3-33
Connection of 25-Pair Cable and PZ-8PFTA
ND-46550 (E)
CHAPTER 3
Page 57
Revision 2.0
Advertisement
Table of Contents
