MC5720/8755/8765 Hardware Integration Guide
20
Important compliance
information for North American
users
The MC5720/MC8755/MC8765 modem has been granted
modular approval for mobile applications. Integrators may use
the MC5720/MC8755/MC8765 modem in their final products
without additional FCC / IC (Industry Canada) certification if
they meet the following conditions. Otherwise, additional
FCC / IC approvals must be obtained.
1.
At least 20 cm separation distance between the antenna and
the user's body must be maintained at all times.
2.
To comply with FCC / IC regulations limiting both maximum
RF output power and human exposure to RF radiation, the
maximum antenna gain including cable loss in a mobile‐only
exposure condition must not exceed:
·
8 dBi in the Cellular band and 4 dBi in the PCS band for the
MC8755/MC8765
·
4.65 dBi in the Cellular band and 3.35 dBi in the PCS band
for the MC5720
MC5720/MC8755/MC8765 modem and its antenna
3.
The
must not be co‐located or operating in conjunction with
any other transmitter or antenna within a host device.
4.
A label must be affixed to the outside of the end product into
MC5720/MC8755/MC8765 modem is incorpo‐
which the
rated, with a statement similar to the following:
·
For MC5720:
This device contains TX FCC ID: N7N‐MC5720
This equipment contains equipment certified under
IC: 2417C‐MC5720
·
For MC8755:
This device contains TX FCC ID: N7NMC8755
This equipment contains equipment certified under
IC: 2417C‐MC8755
·
For MC8765:
This device contains TX FCC ID: N7NMC8765
This equipment contains equipment certified under
IC: 2417C‐MC8765
5.
A user manual with the end product must clearly indicate the
operating requirements and conditions that must be observed
to ensure compliance with current FCC / IC RF exposure
guidelines.
The end product with an embedded MC5720/MC8755/MC8765
modem may also need to pass the FCC Part 15 unintentional
emission testing requirements and be properly authorized per
FCC Part 15.
2130114