Real Time Viewer (Olympus Ve-1) - Olympus EndoCapsule Instruction Manual

2.5

Real time viewer (OLYMPUS VE-1)

1. Display panel (color)
8. Internal antenna
(embedded)
7. Power lamp
6. Power switch
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
5. Real time viewer cable connector (rubber cap)
1. Display panel (color)
Displays endoscopic images sent by the capsule endoscope or the recorder
unit, as well as information such as battery pack level.
2. Battery pack removal ribbon
Used for removing the battery pack. With the battery pack removal ribbon
hanging out of the battery pack slot, insert the battery pack into the battery
slot.
3. Battery pack slot cover
Cover for the battery pack slot to hold the battery pack.
4. Battery pack slot
Insert the battery pack here. To remove the battery pack, pull the ribbon
located inside the slot.
5. Real time viewer cable connector (rubber cap)
Connect the real time viewer cable here. By connecting the real time viewer
to the recorder unit, the operation of the recorder unit can be checked, and
the endoscopic images can be viewed in real-time.
The rubber cap is provided for the protection of the viewer unit connector.
Attach the rubber cap when the real time viewer cable connector is not in
use.
6. Power switch
Turn the real time viewer ON by holding down the switch for 1 second or
more. Turn the real time viewer OFF by holding down the switch again for 1
second or more.
Chapter 2 Nomenclature and functions
2. Battery pack removal ribbon
3. Battery pack slot cover
4. Battery pack slot
43