Recorder Unit (Olympus Re-1) - Olympus EndoCapsule Instruction Manual

2.4

Recorder unit (OLYMPUS RE-1)

11. Power switch
10. Antenna lead set connector
(on backside)
OLYMPUS CAPSULE ENDOSCOPE SYSTEM
1. Indicator lamp
9. Antenna lead set eject button
(on backside)
1. Indicator lamp
Indicates the reception/communication status with the capsule endoscope
and the workstation.
2. Power lamp
Illuminates green when the recorder unit is turned ON.
3. Display panel
Displays patient ID, battery pack level, etc.
4. Battery pack removal ribbon
Used for removing the battery pack. With the battery pack removal ribbon
hanging out of the battery pack slot, insert the battery pack into the battery
slot.
5. Battery pack slot cover
Cover for the battery pack slot to hold the battery pack.
6. Battery pack slot
Insert the battery pack here. To remove the battery pack, pull the ribbon
located inside the slot.
7. Recorder unit cradle connector
Inserted into the recorder unit connector on the recorder unit cradle.
Chapter 2 Nomenclature and functions
2. Power lamp
3. Display panel
4. Battery pack removal ribbon
7. Recorder unit cradle connector
8. Real time viewer cable connector (rubber cap)
5. Battery pack slot cover
6. Battery pack slot
41