Representation Of Monitor Pages - Man D 2840 LE 403 Operating Instructions Manual

Representation of monitor pages

The analog engine data provided by the MMDS is distributed on 4 monitor pages. On
each page, the current engine speed is displayed in the top line. The 1st page continues
with the most important engine data such as oil pressure, coolant pressure, charge-air
pressure and oil pressure in the gearbox. Other engine and gearbox data, as well as ex-
haust temperatures and supplementary information is shown on the subsequent pages:
Page 1
P1 Engine speed
Oil pressure, engine
Coolant temperature, engine
Charge-air temperature
Oil pressure, gearbox
Page 2
P2 Engine speed
Coolant pressure compensator
reservoir
Coolant pressure water pump
Oil temperature, engine
Battery voltage
Page 3
P3 Engine speed
Intake air vacuum
Charging pressure
Exhaust temperature T.A.
Exhaust temperature T.B.
Page 4
P4 Engine speed
Fuel consumption
Engine load
The pages are scrolled using the "PAGE" key. Each time the key is pressed, the screen
moves up to the next page. After page 4, page 1 appears again.
For the display of current alarms and warnings, an alarm screen has been included. This
is called up using the "ALARMS" key. If there is no alarm, the message "no message"
appears on the screen.
A1 > no message
Commissioning and operation
Actual value (example)
Actual value (example)
Actual value (example)
Actual value (example)
24
2100 rpm
4,3 bar
82 °C
41 °C
19 bar
2100 rpm
830 mbar
3,9 bar
103 °C
27,1 V
2100 rpm
30 mbar
1,86 bar
629
°C
613 °C
2100 rpm
162 l/h
79 %