TK-3160
1. Separating the case assembly from the chassis.
1. Remove the volume knob
2. Remove the two screws
c
3. Lift the chassis
, and remove it from the case assembly.
Note: After separating the case assembly from the chassis,
remove the channel knob.
2. Separating the chassis from the TX/RX unit.
1. Remove the two screws
2. Remove the twelve screws
the TX/RX unit A/2.
3. Remove the solder from the antenna terminal using a
m
soldering iron
, then lift the unit off.
Note: The two screws
battery terminal block
4
DISASSEMBLY FOR REPAIR
z
.
x
.
v
fixing the TX/RX unit B/2.
b
n
and two screws
n
of TX/RX unit A/2 are fixing the
,
.
3. How to remove the battery terminal block.
1. Remove the two screws
2. Remove the screw
fixing
/
, then pull out the back cover
≈
.
Ω
.