Your Mifi 4082 Intelligent Mobile Hotspot Device - Novatel MiFi 4082 Getting Started

Your MiFi 4082 Intelligent Mobile Hotspot Device

Your MiFi 4082 device has the following parts:
4082 PHOTO
DEVICE FRONT
FPO
➊
microUSB Port — The AC charger, USB cable and optional car charger connect here.
➋
microSDHC Slot — Removable memory storage slot supports microSDHC cards (microSDHC
card not included).
➌
Power / Connection LED — Displays network connection and status. [See
page 4. for a detailed list of the colors and their defined states.
]
➍
eInk Display — Displays network signal strength, battery charge, GPS, and number of users
connected to the MiFi 4082 device.
4082 PHOTO
DEVICE BACK
➎
Battery Compartment — The battery is placed here.
➏
Master Reset Button — Resets device to factory default settings. {See
Button on page 68.]
➐
SSID Label — If your network is preconfigured, the SSID and Wi-Fi Key are located on the
inside of the battery door.
BATT
FPO
4082 PHOTO
DEVICE BACK
4082 PHOTO
DEVICE BACK
SSID LABEL
3
FPO
LED States on
FPO
Using the Master Reset