Table of Contents
Advertisement
Figure 4-12. New RADIUS Authentication Service
Step 7.
Type the required information into the appropriate fields.
•
Enter a
•
Enter the
•
Enter the
•
Leave the
attribute that contains group information used to assign the authenticated user to an Identity
Profile.
If you elect to use this field, you must also create an Identity Profile to match the group
name that will be returned, and then add a row to the Rights Assignment Table to associate
an Access Policy with that Identity Profile.
•
You can leave the default attribute name for the
name of a RADIUS attribute that specifies the duration (in seconds) after which the client is
forced to reauthenticate.
•
Enter the authentication time-out period (in seconds) in
Step 8.
Save
Click
. The Authentication Services page will reappear.
Step 9.
Authentication Policies
Click the
appear.
ProCurve Secure Access 700wl Series Installation and Getting Started Guide
Name
for this authentication service.
Server
Port
and
information for your RADIUS server.
Secret
that matches the RADIUS server secret, and enter it again in
Group Identity Field
blank. This field is used to specify the name of a RADIUS
link in the left panel. The Authentication Policies page will
Reauthentication Field
. This field refers to the
Timeout
, or leave the default.
Basic Configuration
Confirm Secret
.
4-13
Advertisement
Table of Contents
