Table of Contents
Advertisement
Basic Configuration
Now users will be able to log on either with PPTP or without encryption. In order to use PPTP, the client
must be configured to use PPTP, as described in the following section.
PPTP Client Configuration
This next set of steps configures the PPTP client on the Windows PC. These instructions are for Windows
XP, but the process is similar for Windows 2000.
Step 1.
Open the Network Connections window:
Start
•
Click the
•
From the Control Panel window, double-click
The Network Connections dialog box appears.
Step 2.
New Connection Wizard
Click the
The New Connection Wizard window appears.
Step 3.
Next
Click
to go to the Network Connection Type dialog box.
Figure 4-5. Connection Wizard—Network Connection Type
Step 4.
Connect to the network at my workplace
Select the
Step 5.
Virtual Private Network
Select the
Step 6.
Enter the desired connection name in the
Step 7.
You should now be at the VPN Server Selection dialog box. Enter
address
text box and then click
4-8
Control Panel
button and select
link on the Network Connections dialog box.
connection option. Click
Company Name
Next
.
ProCurve Secure Access 700wl Series Installation and Getting Started Guide
.
Network Connections
.
Next
option and then click
Next
.
text box and then click
42.0.0.1
.
Next
.
Host name or IP
in the
Advertisement
Table of Contents
