Table of Contents
Advertisement
Table 3-2. Installation Parameters
Parameter
Access Controller Module IP address
Subnet mask (Netmask)
Gateway (default router) IP address
Primary and secondary DNS server IP
addresses
Access Control Server IP Address
Access Control Server shared secret
Initial Configuration Using the CLI
Because an Access Controller Module does not provide its own browser-based Administrative Console,
the initial system configuration must be done using the CLI, as explained in the ProCurve Series 5300xl
Switches Installation and Getting Started Guide.
Note:
See Appendix A in the "ProCurve Secure Access 700wl Series Management and Configuration
Guide" for a complete list of CLI commands.
Completing the Installation
You can complete the configuration of your Access Controller Module through the Administrative
Console.
Note:
Beyond the basic setup, all Access Controller Module configuration must be done through the
Access Control Server Administrative Console.
Once the Access Controller Module is initially configured using the CLI, the Access Controller Module
should initiate communication with the Access Control Server. Once this has occurred, the Access
Controller Module should appear as a system component in the Access Control Server's Administrative
Console.
Note:
You can access online Help from within the Administrative Console at any time by clicking the
button. This displays a separate window containing Help about the page you are viewing.
HELP
Step 1.
Point your browser to the IP address of the Access Control Server, and log on to the
Administrative Console.
ProCurve Secure Access 700wl Series Installation and Getting Started Guide
Description
This is assigned as a static IP address.
Defines the Access Control Server's subnet range. Can
be obtained via DHCP. Example: 255.255.255.0.
Defines the default router. Can be obtained via DHCP.
Defines the location of the primary and backup DNS
servers. Can be obtained via DHCP.
The IP address of the Access Control Server that will
manage this Access Controller Module. In an
environment with redundant Access Control Servers, this
must be the IP address of the Primary Access Control
Server.
Secret key used to establish trust relationship between
the Access Control Server and an Access Controller
Module. Alphanumeric string. This must match exactly
the shared secret configured on the Access Control
Server.
Network Setup
3-15
Advertisement
Table of Contents
