Figure 5-6. Spanning Tree Configuration Menu; Spanning Tree Configuration Menu - SMC Networks SMC6516TF User Manual

C
ONFIGURING AND

Spanning Tree Configuration Menu

The Spanning Tree Configuration Menu is accessed from the
Switch Configuration Menu.
___________________________________________________
>>>> Spanning Tree Configuration Menu
1. Spanning Tree Protocol...................... [
2. Switch Priority (0-65535)................... [ 32768 ]
3. Switch Maximum Age (6-40 seconds)........... [
4. Switch Hello Time (1-10 second)............. [
5. Switch Forwarding Delay (4-30 seconds)...... [
6. Display Current Spanning Tree Parameters In Use
<ESC> To Exit Menu
Enter Selection:
___________________________________________________

Figure 5-6. Spanning Tree Configuration Menu

Menu Selections
Spanning Tree Protocol—Allows you to turn Spanning Tree
Protocol on or off.
Switch Priority—Allows you to enter the priority value
(0 - 65535) for the switch.
Switch Maximum Age—Allows you to enter the amount of
time (6 - 40 seconds) any port within the Spanning Tree net-
work will wait before timing out its protocol information.
Switch Hello Time—Allows you to enter the rate (1 - 10
seconds) at which hello frames are to be generated.
Switch Forwarding Delay—Allows you to enter the amount of
time (4 - 30 seconds) a switch port spends in the listening and
learning states.
Display Current Spanning Tree Parameters In Use—
Displays the Spanning Tree Parameters that are currently in use.
5-12
M
ONITORING
<<<<
On ]
20 ]
2 ]
15 ]