FUTABA SkyLeaf BP Instruction Manual page 9

4 Main wing
1. Installation of Ailerons
1 1
2-Wings
● Spread the hinge insert point so that
the paper hinge enters.
2
● Put four paper hinges in Aileron.
Aileron
3
● Pour CA glue into all
4 hinges.
Make glue wick to the interior.
Sky Leaf Tip
4
● Push the Aileron into the wings.
Take clearance between Aileron and Wing (about
1 mm). (So that Aileron and Wing do not interfere
during operation)
5
● Pour CA glue into the paper hinge
inserted in the wing.
6
● Move the aileron after drying. Check that the
aileron is securely attached.
● Attach the aileron to the other main
wing by the same work.
9