FUTABA SkyLeaf BP Instruction Manual page 23

13
Switch・Receiver・Battery
1 2
● Install Receiver battery and Receiver with
Hook-and-Loop Tape inside the fuselage.
The hole here passes the
extension code of Upper
wing aileron servo.
14
Hatch
● Attach reinforcing struts to the hatch.
1 1
1 2
● A slit is necessary.
2 2
● Install the Receiver Switch on side plate.
● U s e t h e s c r e w s
supplied with the
switch.
● Make a rectangular hole that is a little larger than the
total stroke of the switch so that you can turn the
switch ON/OFF without binding.
● Ruff up the adhesion point with
sandpaper to help the glue stick to
the Hatch.
● Adhere hatch struts inside hatch with Epoxy adhesive.
● Do not block four slits.
23