What To Do If - Electrolux EKK61500O User Manual

WHAT TO DO IF...

There is no spark when
lighting the gas
There is no spark when
lighting the gas
There is no spark when
lighting the gas
The flame is blow out im-
mediately after ignition
The gas ring burns un-
evenly
The appliance does not
operate
The oven does not heat
up
The oven does not heat
up
The oven lamp does not
operate
Steam and condensation
settle on the food and in
the oven cavity
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Problem Possible cause
There is no electrical sup-
ply
There is no electrical sup-
ply
Burner cap and crown are
placed uneven
Thermocouple is not heat-
ed sufficient
Burner crown is blocked
with food residues
The fuse in the fuse box is
released
The oven is not switched
on
The necessary settings are
not set
The oven lamp is defective Replace the oven lamp
You left the dish in the
oven for too long
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the oven cavity.
Remedy
Make sure that the unit is
connected and the electri-
cal supply is switched on.
Examine the house electri-
cal installation fuse.
Make sure that the burner
cap and crown are in cor-
rect positions.
After lightning the flame,
keep the knob pushed for
approximately 5 seconds.
Make sure that the injector
is not blocked and the
burner crown is clear of
food particles.
Control the fuse. If the
fuse is released more than
one time, refer to a quali-
fied electrician.
Switch on the oven
Control the settings
Do not leave the dishes in
the oven for longer than
15-20 minutes after the
cooking process ends
.........................................
.........................................
.........................................
ENGLISH 25