What To Do If - Electrolux GH L3-4.5 User Manual

16 electrolux
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch
off the circuit breaker.
Put a cloth on the bottom of the oven for
protection of the oven light and glass
cover.

What to do if...

Problem
There is no spark when lighting
the gas
There is no spark when lighting
the gas
There is no spark when lighting
the gas
The flame is blow out immedi-
ately after ignition
The gas ring burns unevenly
The appliance does not operate The fuse in the fuse box is re-
The oven does not heat up
The oven does not heat up
The oven lamp does not operate The oven lamp is defective
Overheated oven cooling sys-
tem (warning lamp operates)
Steam and condensation settle
on the food and in the oven cav-
ity
If you can not find a solution to the problem,
refer to your dealer or the Service Force Cen-
tre.
Warning! Let a qualified electrician or
competent person do repairs to the
appliance.
Important! If you do not operate the
appliance correctly, the visit from the Service
Force Centre or dealer will not be free of
charge, even during the warranty period.
Replacing the oven light bulb/cleaning the
glass cover
1. Turn the glass cover anti-clockwise to re-
2. Clean the glass cover.
3. Replace the oven light bulb with applica-
4. Install the glass cover.
Possible cause
There is no electrical supply
There is no electrical supply
Burner cap and crown are
placed uneven
Thermocouple is not heated suf-
ficient
Burner crown is blocked with
food residues
leased
The oven is not switched on
The necessary settings are not
set
The internal ventilation is
blocked
You left the dish in the oven for
too long
These data are necessary to help you quickly
and correctly. These data are available on the
rating plate (refer to "Product description")
• Model description ............
• Product number (PNC) ............
• Serial number (S.N.) ............
move it.
ble 300°C heat-resistant oven light bulb.
Make sure that the unit is con-
nected and the electrical supply
is switched on.
Examine the house electrical in-
stallation fuse.
Make sure that the burner cap
and crown are in correct posi-
tions.
After lightning the flame, keep
the knob pushed for approxi-
mately 5 seconds.
Make sure that the injector is not
blocked and the burner crown is
clear of food particles.
Control the fuse. If the fuse is re-
leased more than one time, refer
to a qualified electrician.
Switch on the oven
Control the settings
Replace the oven lamp
Switch off the appliance and re-
fer to Service Centre
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
Hints for appliances with metal
fronts:
If you open the door during or immedi-
ately after the baking or roasting proce-
dure, steam can show on the glass.
Remedy