Table of Contents
Advertisement
INSTALLATION
You should read the section entitled " Safety Information " before starting work on the actual
installation of the water purifier.
Where to install the RO 400
This water purifier can be installed in several different
ways. We will describe the most suitable of these. No
matter which method you choose, there are certain points
which you should be careful to observe:
• The RO 400 must be installed in the upright position.
• The area where it is installed must have access to a cold
water supply, a normal domestic waste pipe (drain) and an
electrical supply.
• It must be easy to inspect the control panel on the
appliance.
• There must be enough space for the front cover to be
opened and for good access to the filter containers.
• When choosing the site, make sure there will be adequate
ventilation all around the appliance. There must be a gap of
20 mm between the sides of the RO 400 and any adjacent
fitments or walls. The connection points of the RO 400
allow you to route hoses and cables in any direction out
from the appliance. The dimensions required for the
installation site are shown in Fig. A. When installing the
appliance, make quite sure that none of the service
connections get crushed or otherwise damaged.
Apply the information panel
In the box of accessories you will find a sheet of self-
adhesive information panels in several languages. Select
the language required and apply the printed panel to the
part of the appliance shown in Fig. B.
8
A
B
Hide quick links:
Advertisement
Table of Contents
