Service And Spare Parts - Electrolux RO 400 User Manual

Service and spare parts

If a fault arises, first work through the trouble-shooting
table "If the RO 400 stops working", and make quite sure
that it is not a problem which you can put right yourself.
If you have to call out a service engineer to remedy one of
the problems in this table, you risk having to pay for the
service call yourself. The same applies to faults caused by
use of the appliance for purposes other than those for which
it was intended.
If you have tried everything relevant described in the table,
and still cannot get your RO 400 to work, then it is time to
call service. Service using genuine spare parts is available via
your dealer.
Before calling service, it is a good idea to make a note of
some appliance details. Look for the data plate on the rear
of the appliance (similar to the one shown in Fig. D), which
will have all the details you need for the RO 400. You can
record them here:
TYPE: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MOD: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PROD. NO.: . . . . . . . . . . . . . . . . . . . . . . . . . .
SER. NO.: . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SERVICE AND SPARE PARTS
D
MADE IN SWEDEN
WP01
TYPE
RO 400
MOD.
919xxxxxx
PROD. NO.
xxxxxxxx
SER. NO.
230 V~ 530 W 50 Hz
10 A
D
M
500 W
25