What To Do If - Electrolux EOD68043 User Manual

Table of Contents

Advertisement

26 electrolux
damage may occur. Regularly wipe over the
control panel, control knobs, handles, doors
and appliance sides using a soft cloth and
hot soapy water. To prevent streaking, finish
with a soft cloth.
Stainless Steel cream cleaners are abrasive
and should be avoided as they may dull the
surface finish. Any spillage on the stain-
less steel finish must be wiped off im-
mediately.
Warning! Do not attempt to remove any
of the control knobs from the appliance
as this may cause damage and is a
safety hazard.
Cleaning inside the grill and oven
compartments
The vitreous enamel coating in the grill/top
oven and main oven compartments can be
cleaned using normal oven cleaners with
care.
Ensure that the manufacturers instructions
are followed and that all parts are well rinsed
afterwards.
Warning! Aerosol cleaners must not
come into contact with elements, the
door seal, or any painted finishes as this
may cause damage.

What to do if...

Warning! Repairs to the appliance must
only be carried out by qualified service
engineers. Considerable danger to the
user may result from improper repairs.
In the case of misuse the visit by the
Customer Care Department technician
or the repair may be chargeable, even
during the warranty period.
Information for appliances with metal
fronts:
Due to the appliance's cool front, when
the door is opened during or shortly after
baking or roasting, there may be con-
densation of the inner glass panel for a
short while.
Problem
The grill, ovens and timer do not
work.
Cleaning the door(s)
• Household detergents and bleaches.
• Soap Impregnated pads unsuitable for
non-stick saucepans.
• Abrasive cleaning pads, scorers and steel
wool pads.
• Chemical oven pads or aerosols.
• Rust removers.
• Bath/Sink stain removers.
Cleaning between the outer and inner
door glass
The door glass is removable for cleaning.
Clean the outer and inner glass using hot
soapy water or hob cleaner may be used. Do
not use hob cleaner on the Stainless Steel or
painted finishes.
Ensure that all parts are well rinsed and thor-
oughly dried before attempting to replace the
outer door.
Please carry out the following checks on your
appliance before calling a Service Engineer.
It may be that the problem is a simple one
which you can solve yourself without the ex-
pense of a service call.
In-guarantee customers should make
sure that the checks have been made as
the engineer will make a charge if the
fault is not a mechanical or electrical
breakdown.
Please note that proof of purchase is re-
quired for in-guarantee service calls.
Check that the appliance has been wired in to the appliance supply
and is switched on at the wall.
Check that the main appliance fuse is working.
Warning! Under no circumstances
should the door assembly be detached
from the product for cleaning.
Warning! To prevent damaging or
weakening the door glass panels avoid
the use of the following:
Possible Solution

Advertisement

Table of Contents
loading

Table of Contents