Set Dial Mode; Set Ring Volume - VTech DE6010 User Manual

Settings

Set dial mode

The dial mode is preset to touch tone. If you'd like to change the setting to
pulse:
• If you have
pulse (rotary)
• Make sure the handset is idle (off).
service, the
• Press MENU/SEL to display menu.
dial mode must
• Press
be changed.
select.
• Press
• Use
• Press MENU/SEL to confirm your selection. The screen will display Stored
and you will hear a confirmation tone (if the Key beeps setting is on).

Set ring volume

This feature allows you to adjust the ringer volume. The menu includes options
for five different levels of volume. You will hear a sample of each ringer volume
as you scroll through the choices.
• Make sure the handset is in idle mode.
• Press MENU/SEL to display menu.
• Press
• Press
• Use
a tick and a sample of ringer will be played.
• Press MENU/SEL to confirm. The screen will display Stored and you will
hear a confirmation tone (if the Key beeps setting is on).
12
three times to reach Setup BS, then press MENU/SEL to
to select Dial mode and press MENU/SEL to select.
or to select pulse or touch tone (DTMF).
twice to reach Setup HS. Press MENU/SEL to select.
to reach Ring volume, and press MENU/SEL to select.
or to scroll through the choices. Current selection is marked with
www.vtechphones.com
Dial mode
Voice mail
DTMF
Pulse
Ring volume
Tones
Stored