Advanced settings
Edit handset name
You can personalize the name of the handset and assign numbers to identify
different handsets (if you have more than one handset).
• Make sure the handset is in idle mode.
• Press MENU/SEL to display the menu.
• Press
twice to reach Setup HS. Press MENU/SEL to select.
• Press
three times to reach Handset Name, and press MENU/SEL.
• Use the dial pad to enter characters. (See the chart on the previous
page.)
• Press MENU/SEL to confirm. The screen will display Stored and you will
hear a confirmation tone (if the Key beeps setting is on).
Set key beeps tone
The handset is preset to beep when any key is pressed. To change the
setting:
• Make sure the handset is in idle mode.
• Press MENU/SEL to display the menu.
• Press
twice to reach Setup HS. Press MENU/SEL.
• Press
twice to reach Tones, and press MENU/SEL.
• Use
twice to reach Key beeps. Press MENU/SEL.
• Use
or
to select On or Off.
• Press MENU/SEL to confirm. The screen will display Stored and you will
hear a confirmation tone (if you have set the Key beeps setting to on).
www.vtechphones.com
Handset name
Language
Name
Stored
Tones
Handset name
Key beeps
17