Uplink Bandwidth - D-Link DIR-430 User Manual

.0
DIR-430 RangeBooster G Wireless Router User's Guide
Version : 1

Uplink Bandwidth

If the DIR-430 is connected to a typical Broadband Internet Connection (such as
Cable or DSL), you may wish to limit the rate at which traffic is sent on the
Internet. Without doing so there are chances of the Cable/DSL Modem dropping
packets making an unpleasant Internet Experience. You can limit the Uplink
Bandwidth by setting correct Uplink Bandwidth value (Check with your ISP for
more information on your connection speed).
Click on the Advanced item on the top panel, then click on the Uplink
Bandwidth item on the left hand menu.
Setting the uplink bandwidth value limits the speed of the traffic sent on the
Internet to the value selected. Check with your ISP for the type of connection you
purchased. Based on the type of connection selected, outgoing data bandwidth
will be limited to the value shown in the bracket of each connection.
If you want to select different value from the standard uplink bandwidths shown,
select other option that facilitate to enter any value you wish. You can enter any
value between 26 Kbps and 102400 Kbps depending on the bandwidth you
purchased from the ISP.
If you don't know to enter the exact uplink bandwidth value of your Internet
connection, you may obtain the information using different standard bandwidth
meters available on the Internet. You may test your connection bandwidth and
speed from the website,
http://reviews.cnet.com/7004 7254_7 0.html
Default uplink bandwidth is set to 256Kbps on the DIR-430.
Page 49 of 103