Logout - D-Link DIR-430 User Manual

.0
DIR-430 RangeBooster G Wireless Router User's Guide
Version : 1

Logout

You may like to logout once your configuration is complete. You will find the
Logout section by clicking the Status tab, then clicking Logout on the left hand
menu. Clicking on the Logout prompts you with a question on how it should be
logged out. This case is shown below.
You should click on the Save and Logout if you require the current configuration
on the DIR-430 to be used upon rebooting.
Else, you may click on Logout without Saving if you need this configuration for
the time the DIR-430 is running, but not for next reboot.
Cancel button cancels the logout operation and allows you to configure more.
Page 92 of 103