Safety Information For The Motor; Receiving The Product; Transporting The Product; Unpacking The Product - Grundfos CR 95 Installation And Operating Instructions Manual

1.3 Safety information for the motor

Read the safety information specific for the
motor in the instructions for the motor
which are supplied with the pump.

2. Receiving the product

2.1 Transporting the product

WARNING
Falling objects
Death or serious personal injury
- Keep the product in a stable and fixed
position during transportation.
- Wear personal protective equipment.

2.2 Unpacking the product

WARNING
Falling objects
Death or serious personal injury
- Keep the product in a stable position
during unpacking.
- Wear personal protective equipment.

2.3 Inspecting the product

Before you install the product, do the following:
1. Check that the product is as ordered.
2. Check that no visible parts have been damaged.
If parts are damaged or missing, contact your local
Grundfos sales company.

2.4 Lifting the product

WARNING
Falling objects
Death or serious personal injury
- Do not use the motor eyebolts to lift the
entire pump if the pump is fitted with a
motor of another make than Grundfos
MG and MGE.
- Follow the lifting instructions.
- Use lifting equipment which is approved
for the weight of the product.
- Persons must keep a safe distance to
the product during lifting operations.
- Wear personal protective equipment.
The following sections describe various lifting
situations and the lifting instructions which must be
followed in order to obtain safe lifting of the product:
• Position of lifting brackets: See section
2.4.1 Position of lifting
• Lifting the motor with or without the motor stool.
See section 2.4.2 Lifting the motor off the
• Horizontal lift: See section
product in horizontal position.
• Raising or laying down the product: See section
2.4.5 Raising or laying down the
• Vertical lift: See section
in vertical position.
• Lifting of CRE pumps: See section
pumps fitted with MGE
2.4.1 Position of lifting brackets
A
Fig. 1 Position of lifting brackets
A: Incorrect position of lifting brackets.
B: Correct position of lifting brackets.
brackets.
pump.
2.4.4 Lifting the
product.
2.4.6 Lifting the product
2.4.3 Lifting of
motors.
B
3