Installing The Product; Mechanical Installation - Grundfos CR 95 Installation And Operating Instructions Manual

Table of Contents

Advertisement

3. Installing the product

DANGER
Falling objects
Death or serious personal injury
- Fasten the pump securely to a solid and
even foundation according to the
specifications stated in the installation
and operating instructions.

3.1 Mechanical installation

WARNING
Contamination when pumping drinking
water
Death or serious personal injury
- Before the pump is used for supplying
drinking water, flush the pump
thoroughly with clean water.
- Do not use the pump for drinking water
if the internal parts have been in contact
with particles or substances not suitable
for water intended for human
consumption.
3.1.1 Lifting the product
WARNING
Falling objects
Death or serious personal injury
- Do not use the motor eyebolts to lift the
entire pump if the pump is fitted with a
motor of another make than Grundfos
MG and MGE.
- Follow the lifting instructions.
- Use lifting equipment which is approved
for the weight of the product.
- Persons must keep a safe distance to
the product during lifting operations.
- Wear personal protective equipment.
For lifting instructions, see section
product.
3.1.2 Installation guidelines
The pump must be secured to a horizontal, plane
and solid foundation with bolts through the holes in
the base plate. When installing the pump, be aware
of the information below in order to avoid damaging
the pump.
2.4 Lifting the
7

Advertisement

Table of Contents
loading

Table of Contents