Table of Contents
Advertisement
Right Side
Serial I/O Port of RS-485/422 and RS-232/422/485
Connect the serial data cable between the converter device and the serial devices.
Follow the parameter setup procedures to configure the converter (see the following
chapters).
RS-232/485/422
RS-485/422
Digital I/O
Through
, D I/O can transform the status of sensor into the
EX-9132C-2RS485
TCP/IP
package
data
and
send
out
by
Ethernet
Data
Stream
(The
must indicate the IP address and COM Port) or activate the
EX-9132C-2RS485
indicated Digital output (Remote WinSock must indicate the
).
EX-9132C-2RS485
Connect
the
data
wires
between
the
and
the
EX-9132C-2RS485
RS232/RS-485/RS-422 device. Follow the parameter setup procedures to configure
the converter (see the following chapters).
11
Advertisement
Table of Contents
Need help?
Do you have a question about the EX-9132C-2RS485 and is the answer not in the manual?