Controller Updated - Expert EX-9132C-2RS485 Operation Manual

Controller Updated

Press "Update" Button after finish the detailed parameter setting. The converter
will save all parameters into internal non-volatile memory and then reboot (see
Figure 5.3). It takes about 5 seconds to complete the whole process, and a new
login page will be presented (see Figure 5.1).
You can re-login and check if all parameters have been correctly saved. If
everything is ok, you can close the browser now.
Note : If the domain of the converter is different from that of the computer
running the browser, the login page won't appear unless the converter's
"Gateway Address" has been correctly set.
30
(Figure 5.3)