Safety Warning System (Sws ) Alerts - Beltronics Vector 940 Operating Instructions Manual

greater the displacement of the beam and the
shorter the dwell time of the beam at the target
point. Therefore, there is the possibility of receiving
only a few Laser pulses. Due to these characteristics,
all Laser alerts should be taken seriously.
k
Safety Warning System
With the Safety Warning System
SWS ™ transmitter in use, your detector will provide a
unique, 2 second SWS
Warning System
indicating Highway Hazard Zone Advisory) to quickly
orient you to the type of situation ahead. This
introductory message is followed by a specific Text
Message (i.e.
Voice Message which is repeated twice. After the
Digital Voice, the unit will continue to present the
message and provide the "clicking" tone for as long as
an SWS ™
messages are received, each message is presented
twice before the "clicking" resumes.
You can replay the last SWS
pressing the DRK button within 30 seconds of
receiving an SWS
Message are replayed.
If you have selected "
your unit will show just the Text Message (see
Selectable Features, page 1 1).
Note—the end of a multiple word SWS
indicated by an asterisk.
VECTOR 940 provides only Digital Voice and Text
Messages for the FIVE SWS
22
60 individual messages.
® (SWS ™
™ tone coupled with a Safety
® category word (i.e.
"
S S H H A A R R P P C C U U R R V V E E A A H H E E A A D D
signal is detected. If two separate SWS
™ alert. Both Digital Voice and Text
S S W W S S t t o o n n e e
™
) Alerts
® feature ON and an
"
H H a a z z d d Z Z o o n n e e
"
) and Digital
™ message received by
" (Digital Voice off),
™ message is
categories and not all
"
™