Radar/laser/safety remote detector.
advanced protection system
with shadow technology (24 pages)
Summary of Contents for Beltronics LaserPro 904
Page 1
Operating Manual For LaserPro ™ Model LP904 Ultimate Performance. Proven Technology.
Page 2
904 is comprised of sophisticated, exterior mounted front and rear Laser transceivers. You can operate LaserPro ™ 904 as a stand-alone unit, and know you’re protected beyond traditional “Laser detectors”, or you can supplement LaserPro capabilities with a dash or...
Quick Overview of Functions and LED Display 8. Green Power On LED: Illuminates to confirm LaserPro™ 904 is operational. 4. Red “F” LED: illuminates to confirm a Laser alert from the front. 1. P/V Button: Power and Volume button. 7. Audio Speaker: All audio alerts are emitted from this opening.
3. “F” Red LED: Illuminates red to confirm a Laser alert from the front of your vehicle. 4. “R” Red LED: Illuminates red to confirm a Laser alert from the rear of your vehicle. ™ 904 by pressing ™ 904 has power and is...
Laser signal. Once the DIS (DISARM) button has been pressed, LaserPro 904 will display a flashing green power LED. This flashing green LED serves to confirm that LaserPro is no longer “blocking” ™...
Once you have pressed the DIS button, you can “rearm” the blocking function without waiting the 60 second time period. To “rearm” LaserPro 904 BEFORE the automatic 60 second time out expires, simply press the DIS button a second time. LaserPro ™...
“on”. Error Indications LaserPro ™ communication with each of its components. If at anytime a problem occurs that could impede performance, (i.e. cable is disconnected) an error message will occur. 904 is in constant...
Front Transceiver Error If one, or both of the front- mounted transceivers are not communicating properly or become disconnected, the red “F” LED (front) on the display will illuminate fully coupled with an audible tone. This alert will continue until the unit is turned off, indicating that service is required.
Problem LaserPro™ 904 does not appear to be ON Solution: • Check that the P/V control is turned ON. • Check that the vehicle ignition is ON. • Check all connections. Problem LaserPro™ 904 gave no alert when a police car was in sight Solution: •...
FCC, but rather the FDA, which has no regulations concerning interference with traffic Laser signals. LaserPro 904 is legal to use in most states except for California, Utah, Virginia, and Minnesota. Check with your local code before use, or call BELTRONICS at: 800- 737-9393.
3. In the event of a defect, malfunction or other failure to consumer to this warranty, BELTRONICS will, at is sole discretion, repair or replace the unit at no charge. You are responsible for all shipping costs in connection with warranty service pursuant to this warranty.
Your name, complete return address and written description of the problem. (No P.O. Box Please) b) A telephone number where you can be reached during regular business hours. c) A copy of your dated sales receipt. Warranty Service ™ 904 is not operating properly, please...
Post Warranty Service The following arrangements apply if the warranty period has expired or you are not able to provide a copy of your dated sales receipt indicating purchase within the last 12 months. 1. Return your unit to the appropriate address under Warranty Service and follow steps 1 through 3(b) outlined in that section.
Page 16
#4,625,210 #4,952,936 #4,961,074 #5,587,916 #5,600,132 Canada #1,187,586 #1,187,602 Other Patents Pending is a registered trademark of BELTRIONCS USA, Inc. LaserPro 904 is a trademark of BELTRONICS USA, Inc. Printed in Canada Head Office Canada L5L 1J9 #4,630,054 #5,402,087 #1,295,714 273004-12...
Need help?
Do you have a question about the LaserPro 904 and is the answer not in the manual?
Questions and answers