Toshiba TOSVERT VF-S15 Instruction Manual page 4

<Standard>
Output frequency
[Hz]
terminal F
terminal S1
The combined terminal function can be used for output signals.
For example, you can assign the low speed detection signal (function No: 4) and small current
detection (function No: 26) to one terminal (Terminal OUT). When both signals are detected,
Terminal OUT outputs signal.
See Example 4 in Chapter 5 for details.
<Standard>
Inverter
RY
OUT
Output frequency
[Hz]
Output current
Low speed detection signal
Small current detection signal
Terminal OUT
Coast stop
<My function-S>
Low speed detection signal
Small current detection signal
- 3 -
<My function-S>
Output frequency
[Hz]
terminal F
Output signal by detection both
OUT
Low speed detection and Small
current detection.
Low speed level
Small current level
E6581865
Coast stop