Table of Contents
Advertisement
5.
TROUBLESHOOTING
5.1 Troubleshooting
Check the points listed here before you call for
help, and make sure that you have followed the
Important safety Instructions on pages 3 and 4.
Problem
Possible causes
Plug is not firmly in socket, or
The dryer
power not turned on.
will not
start:
You have blown a fuse.
Check the power point
with another appliance.
You have not closed the dryer
door or pushed in the door
safety switch button.
The selected drying time was
Your
insufficient. Select a longer time
clothes
setting.
are still
Longer time may be needed when
wet:
the room temperature is 10 ºC or
less.
Check that the lint filter is not
blocked.
Check to see that you have
read all the instructions carefully.
Contact the Service Center if you
are still having problems. Write
down the model and serial numbers
and the date of purchase before
you ring. The Service Center will
need this information.
Possible Failures
Certain problems are due to lack of
simple maintenance or oversights, which
can be solved easily without calling out an
engineer. Before contacting your local
Service Centre, please check possible
cause of malfunction and solution listed
below.
Once the problem has been eliminated,
press the Start/Pause button to restart the
program. If after all checks, the problem
persists, contact your local Service Centre.
WARNING! Deactivate the appliance
before you do the checks.
Alarm Code:
The appliance door is open or not
closed correctly. Please check the door!
The main supply is unstable. Wait until
the main supply is stable.
No communication between electronic
elements of the appliance. Switch off
and switch on again.
13
ENGLISH
Hide quick links:
Advertisement
Table of Contents
