Configuring the MBB300C ....................9 2.5.1 Manually Entering LAN Connection Information ............10 Operating the MBB300C ......................13 Turning the MBB300C On ....................13 Turning the MBB300C Off ....................13 Using the MBB300C ......................13 Maintenance ..........................14 Troubleshooting ........................... 15 Technical Specifications ......................
The MBB300C is ruggedized for marine use and includes a solid state disk drive to withstand the pounding associated with waves. And since the MBB300C dissipates less than 10 watts, there is no need for internal cooling fans that are noisy and wear out causing electronics to overheat and fail.
MBB300C User's Manual The MBB300C connects to a monitor through a VGA or HDMI connector and associated touch screen through a USB or serial port connection. ® Alternatives to controlling the N2KView software through a touch screen include keyboards, mice, or track balls connected through USB.
Quick Install Installing the Maretron MBB300C display involves the following four steps. Please refer to the individual sections for additional details. Unpacking the Box (Section 2.1) Choosing a Mounting Location (Section 2.2) Mounting the MBB300C (Section 2.3) ...
Step 1: Turn the MBB300C over. Step 2: Drill holes in the intended installation surface. Step 3: Align the mounting holes in the sides of the MBB300C with the predrilled holes in the mounting surface. Step 4: Insert four retention screws, two on each side, to secure the MBB300C to the wall.
Figure 2 – Mounting Screw Hole Locations Connecting the MBB300C Some I/O interface connections of the MBB300C are found on the front panel (see Figure 3). The I/O interface panel located on the front of the MBB300C has the following I/O interface connectors: ...
MBB300C User's Manual The I/O interface panel located on the rear of the MBB300C (see Figure 4) has the following interface connectors: 1 x VGA output 1 x HDMI output 1 x RS-232 Serial Port 2 x USB 3.0 connectors ...
Step 2: Align the VGA connector on the cable with the VGA connector on the rear panel of the MBB300C. Step 3: Once aligned, gently insert the cable VGA connector into the MBB300C VGA connector. 2.4.2.2 HDMI Connection There is one external HDMI connector. The HDMI connector enables connection to a monitor. To connect a HDMI cable with the HDMI connector, please follow the instructions below.
Step 1: The locations of the USB connectors are shown in Figure 3 and Figure 4. Step 2: Align the USB device connector with one of the connectors (see Figure 6). Figure 6 – USB Device Connection Step 3: Once aligned, gently insert the USB device connector into the MBB300C connector. Page 8 Revision 1.0...
When the MBB300C is connected to an appropriate power source, you can use the power switch located on the front panel (see Figure 4) to turn the MBB300C on or off. The MBB300C can also be switched on and off by applying or removing power through an external switch or breaker. Any time the power is reapplied to the MBB300C, it will turn on.
Assigning a unique name to the MBB300C is necessary in order to help you determine the source of alerts generated by a MBB300C or other Maretron device capable of generating alerts.
Figure 9 – N2KView ® Window with Tabs Displayed ® Click anywhere inside the N2KView screen to display the screen tabs as shown in Figure 9 above. Click on the “Commands & Settings” tab (on the right) to display the Commands & Settings Dialog.
Uncheck the “DHCP” box to indicate that your LAN does not use DHCP. In the “IP Address” field, enter the IP address you wish to assign to the MBB300C. Click on the “Configuration” button in the Commands & Settings window to display the Configuration dialog.
3 Operating the MBB300C Turning the MBB300C On To turn on the MBB300C, press the power switch, located on the right hand side of the front panel of the MBB300C. The power button LED will illuminate. Turning the MBB300C Off To turn the MBB300C off, use the “Shutdown”...
Ensure that the unit is mounted securely and cannot be moved relative to the mounting surface. If the unit is loose, tighten the mounting screws. Check the security of the power and network cables connected to the MBB300C and tighten if necessary.
MBB300C will expose the sensitive electronic components to adverse environmental conditions that may render the unit inoperative. Please do not open the MBB300C, as this will automatically void the warranty. If service is required, please return the unit to an authorized Maretron service location.
MBB300C User's Manual 6 Technical Specifications Specifications Parameter Value Comment Video Connector VGA Port For Monitor Connection HDMI Port Monitor Resolution 2560 × 1600 Maximum (VGA) 1920 × 1080 Maximum (HDMI) USB Connector Two USB 3.0 connections For connecting Peripherals (Mouse, Two USB 2.0 connections...
7 Technical Support If you require technical support for Maretron products, you can reach us in any of the following ways: Telephone: 1-866-550-9100 Fax: 1-602-861-1777 E-mail: support@maretron.com World Wide Web: http://www.maretron.com Mail: Maretron, LLP Attn: Technical Support 9014 N. 23...