Installation; Unpacking The Box; Choosing A Mounting Location; Mounting The Mbb300C - Maretron MBB300C User Manual

MBB300C User's Manual

2 Installation

2.1

Unpacking the Box

When unpacking the box containing the Maretron MBB300C, you should find the following items:
 1 – MBB300C Maretron Vessel Monitoring and Control Black Box
 1 – 3-Pin Power Connector
 1 – USB Flash Drive Containing System Documentation
 1 – Warranty Registration Card
If any of these items are missing or damaged, please contact Maretron.
2.2

Choosing a Mounting Location

The MBB300C must be mounted in an indoor location.
2.3

Mounting the MBB300C

The MBB300C can be mounted to a wall or other flat surface.

2.3.1 Mounting the System

To mount the MBB300C onto a wall or some other surface, please follow the steps below.
Step 1: Turn the MBB300C over.
Step 2: Drill holes in the intended installation surface.
Step 3: Align the mounting holes in the sides of the MBB300C with the predrilled holes in the
mounting surface.
Step 4: Insert four retention screws, two on each side, to secure the MBB300C to the wall.
Page 4 Revision 1.0