Advertisement
Quick Links
TSM800 / TSM1330 Update Instructions
Contents
Contents ........................................................................................................................................................ 1
Automatic Updates ....................................................................................................................................... 1
Manual Update to the Latest Version of N2KView ....................................................................................... 2
Manual Update of the Complete Operating System .................................................................................... 3
Automatic Updates
In a system where the TSM800 or TSM1330 has internet access, if the Allow Automatic Updates check
box in the Configuration Dialog is checked, the system will automatically check for updates on startup,
and prompt the user to the install the updates.
This should be the normal practice, and the rest of this document is not applicable.
Page 1
Advertisement
Related Manuals for Maretron TSM800
Summary of Contents for Maretron TSM800
- Page 1 Manual Update of the Complete Operating System ..................3 Automatic Updates In a system where the TSM800 or TSM1330 has internet access, if the Allow Automatic Updates check box in the Configuration Dialog is checked, the system will automatically check for updates on startup, and prompt the user to the install the updates.
- Page 2 If the second message is not displayed, the xml file that you downloaded was not found in the root directory of the USB memory stick Restart Note that the TSM800 or TSM1330 will do an automatic restart 5 minutes after this process is started. This is necessary. Page 2...
- Page 3 Manual Update of the Complete Operating System These are the instructions to create a USB stick that will do the complete update of the OS on a TSM800 or TSM1330. In normal operation this should not be required; please contact support@maretron.com...
- Page 4 Make sure that you are on the USB Flash drive and double click on makeboot.bat. This will run a program to make the USB flash drive bootable. Eject the flash drive – you are now ready to install the new software on the TSM800 or TSM1330 Page 4...
- Page 5 Plug the new USB flash drive into the TSM800 or TSM1330, and a USB keyboard Power on the TSM800 or TSM1330 and press the “Del” key as soon as the BIOS splash screen appears; this should put you into the BIOS settings screen.
- Page 6 Press the Enter key to continue (this will happen automatically if you wait more than 30 seconds) After several seconds of system messages scrolling by, the prompt “Are you sure you want to continue? ?” appears at the bottom of the screen: You must type “y”...
- Page 7 A second prompt will ask to confirm the update again as the following screen shows: The restore of the software image begins next. The following two screens show the beginning and end of the process: Page 7...
- Page 8 Page 8...
- Page 9 Press the 0 key and then ENTER key to power down the system. Remove the USB flash drive. Power on the TSM800 or TSM1330, restore the previously backed up settings and verify that the new N2KView software functions as expected.