Table of Contents
Advertisement
MBB300C User's Manual
The MBB300C connects to a monitor through a VGA or HDMI connector and associated touch screen
through a USB or serial port connection.
Alternatives to controlling the N2KView
track balls connected through USB. In addition to the two completely isolated CAN bus connectors
(M12) for easy connection to single or redundant NMEA 2000
Ethernet port for connecting Internet Protocol (IP) cameras for viewing within the N2KView
Of course, you get the same flexibility using Maretron's N2KView
you would running the software on a PC, which includes the ability to configure as many screens as
you want with exactly the information you want to see. Plus, you get free upgrades to the software as
improvements and new features are added.
The Maretron MBB300C is designed to operate within the harsh demands of the marine environment.
However, no piece of marine electronic equipment can function properly unless installed, configured,
and maintained in the correct manner. Please read carefully and follow these instructions for
installation, configuration, and usage of the Maretron MBB300C in order to ensure optimal
performance.
1.2
Firmware Revision
This manual corresponds to the MBB300C running N2KView
1.3
MBB300C Features
The Maretron MBB300C has the following features.
Full version of N2KView
Wired Ethernet interface
Dual Optically-Isolated CAN bus connectors for direct NMEA 2000
Supports user-supplied VGA or HDMI monitor
Supports user-supplied touchscreen (ELO, 3M Microtouch, Hampshire TSharc, Penmount,
General Touch, or any USBHID compliant touchscreen)
Supports user-supplied mouse and keyboard
Operates on 9-36VDC
10W power consumption
Solid State Disk Drive
Fanless cooling system
All N2KView licenses included
Page 2
®
software through a touch screen include keyboards, mice, or
®
software preinstalled
®
networks, the MBB300C has an
®
software from the MBB300C as
®
Version 5.0.15.
®
connection
®
software.
Revision 1.0
Advertisement
Table of Contents
