Figure 9 - N2Kview; Figure 10 - Commands And Settings Dialog - Maretron MBB300C User Manual

a. Click anywhere inside the N2KView
9 above.
Click on the "Commands & Settings" tab (on the right) to display the Commands &
b.
Settings Dialog.
Click on the "Configuration" button in the Commands & Settings window to display the
c.
Configuration dialog.
Click on the "Network Configuration" tab in the Configuration dialog to display the
d.
Network Configuration dialog.
Revision 1.0
Figure 9 – N2KView
Figure 10 – Commands and Settings Dialog
®
Window with Tabs Displayed
®
screen to display the screen tabs as shown in Figure
Page 11