MBB300C User's Manual
Figure 5 – LAN Connection
Step 3: Once aligned, gently insert the LAN cable RJ-45 connector into the onboard RJ-45
connector.
2.4.4 USB Device Connection
There are two external USB 2.0 connectors and two external USB 3.0 connectors. To connect a USB
device, please follow the instructions below.
Step 1: The locations of the USB connectors are shown in Figure 3 and Figure 4.
Step 2: Align the USB device connector with one of the connectors (see Figure 6).
Figure 6 – USB Device Connection
Step 3: Once aligned, gently insert the USB device connector into the MBB300C connector.
Page 8
Revision 1.0