Rs-232 Connection; Figure 4 - Mbb300C Front Panel - Maretron MBB300C User Manual

MBB300C User's Manual
The I/O interface panel located on the rear of the MBB300C (see Figure 4) has the following interface
connectors:
 1 x VGA output
 1 x HDMI output
 1 x RS-232 Serial Port
 2 x USB 3.0 connectors
 1 x Gigabit Ethernet (LAN) port
 1 x 3-pin power terminal block with wide range power input (9V-36V)
Power Terminal Block
HDMI Connector
USB 3.0 Ports
Ethernet (LAN) Port
VGA Connector
RS-232 Connector

2.4.1 RS-232 Connection

There is one external RS-232 connector. The RS-232 connector enables connection to an external
touch screen. To connect a serial cable with the RS-232 connector, please follow the instructions
below.
Step 1: Locate the RS-232 connector on the rear panel of the MBB300C.
Step 2: Align the RS-232 connector on the serial cable with the RS-232 connector on the rear panel
of the MBB300C.
Step 3: Once aligned, gently insert the serial cable RS-232 connector into the MBB300C RS-232
connector.
Page 6
Figure 4 – MBB300C Front Panel
Revision 1.0