Figure 11 - Configuration Dialog - Maretron MBB300C User Manual

MBB300C User's Manual
Uncheck the "DHCP" box to indicate that your LAN does not use DHCP.
e.
In the "IP Address" field, enter the IP address you wish to assign to the MBB300C.
f.
Click on the "Configuration" button in the Commands & Settings window to display the
g
Configuration dialog.
In the "Subnet Mask" field, enter the subnet mask value used on your LAN (in most cases,
h.
this value will be "255.255.255.0").
In the "Default Gateway" field, enter the IP address of the default gateway of your LAN.
i.
In the "Default DNS" field, enter the IP address of a DNS (Dynamic Name Service) Server
j.
used on your LAN.
Click the "Update" button to make these changes permanent. The screen will go blank for a
k.
few seconds while this is being done.
Page 12
Figure 11 – Configuration Dialog
Revision 1.0