Using The Product Manual - ABB i-bus SA/S 2.6.2.1 Product Manual

®
ABB i-bus KNX
General
1 General
KNX systems provide an attractive solution that meets the most demanding residential, commercial and
public buildings requirements. High living standards, comfort and safety can be easily combined with cost-
effectiveness and environmental awareness using KNX bus systems from ABB. KNX products cover the
entire range of buildings applications, from illumination and blind control to heating, ventilation, energy
management, security and surveillance. These requirements can be met cost-effectively with minimal
planning and installation effort using the ABB KNX. Furthermore, flexible room usage and continuous
adaptation to changing requirements are simple to implement. SA/S Switch Actuators fulfill individual
requirements in industrial, commercial and public buildings as well as in the private sector for controlling
switchable loads, e.g.:
•
Illumination
•
Heating control
•
Signaling equipment
Certain types of Switch Actuator can also detect and monitor load current via a threshold value function.
Based on the load current detected, responses can be triggered via KNX and the load can be switched off
directly or switched via KNX.
1.1

Using the product manual

This manual provides you with detailed technical information on the ABB i-bus
range, its installation and programming.
Application of the device is explained using examples.
This manual is subdivided into the following sections:
Section 1
Section 2
Section 3
Section 4
Section A
General
Device technology
Commissioning
Planning and application
Appendix
®
SA/S Switch Actuator
SA/S | 2CDC 505 056 D0208 5