®
ABB i-bus
KNX
Appendix
A
Appendix
A.1
Scope of delivery
ABB i-bus
Please check the items received using the following list.
•
1 (one) SA/S x.y.z.w
•
1 (one) set of installation and operating instructions
•
1 (one) bus connection terminal (red/black)
1)
x = number of outputs (2, 4, 8 or 12)
y = rated current in Ampere (6 A, 10 A or 16 A)
z = device characteristic:
w = hardware version
A.2
Code table, 8 bit scene
The following table indicates the telegram code for an 8 bit scene in hexadecimal and binary code for the
64 scenes. Normally when retrieving or storing a scene, an 8 bit value must be sent.
®
KNX SA/S Switch Actuators are supplied together with the following components.
1)
, MDRC
1 = standard device with normal switching capacity
5 = C-load device (200 µF) with increased switching capacity
6 = C-load device (200 µF) with increased switching capacity and current detection
SA/S | 2CDC 505 056 D0208 171