Smeg Washing Machine WM62121 Instructions For Use Manual page 17

Interruptions Interruptions
Upon switching OFF, all additional pre-
selected functions are deleted; therefore
they must be switched-ON again.
- End of operation
Flashing LED's for washing stages indicate that the
program was completed.
•
Sound signal indicates that you may now open
the door of the machine.
•
Extract the laundry from the drum and remove
any alien objects from the door gasket.
•
Leave the door ajar to allow the interior to dry.
•
Close the water inlet faucet.
•
Switch the machine off by turning the program
selector to position "0".
•
By the user
Own interruption
You may stop the program by turning the program
selector to the position "0". If there is water in the
drum select one of additional programs (drain, spin)
to empty the water and terminate the program.
PAUSE
By pressing the START/PAUSE button (F) program
may be suspended at any time. After certain time
you may open the door if there is no water in the
drum, otherwise this is not possible. Program is
continued by pressing the START/PAUSE button
(F).
•
Failures
Program is suspended in case a failure occurs.
Signal LED's are flashing and sound signal is
heard (see cf. Failures).
•
Power failure
If a power failure occurs the washing program is
17