Smeg Washing Machine WM62121 Instructions For Use Manual page 16

Start the operation Start the operation
16
- Adding washing and softening agents
(see Tips for washing and energy saving)
•
pre-wash compartment
•
main wash compartment
•
softener compartment
If you do not apply the program which includes the
pre-wash feature, you may add washing detergent
directly into the drum, using the measuring vessel.
When adding softener, be careful to fill the
dispenser only up to the marked level.
Be sure to close the detergent dispenser
when opening/closing the appliance door.
•
Push the START/PAUSE button (F). Sound signal
confirms the start, the LED indicating particular
washing stage stops flashing. The machine starts
operating after a few seconds. If the door is not
properly closed after starting the operation, the
washing stage indicator LED starts flashing again
after a few seconds. When you close the door, the
machine initiates the selected program.
•
As each washing stage is completed the relevant
washing stage indicator LED goes off and the
subsequent one goes on.
•
In case you would like to alter the washing
program after the initiated washing operation,
turn the program selector for one second to the
position "0", followed by the selection of a new
program.