Selecting Pages - Sony HDC1700 Operation Manual

Available menus
USER menu
This menu can include menu pages selected from among the
OPERATION, PAINT, MAINTENANCE, FILE, and
DIAGNOSIS menus, for convenience. Changing, adding, and
deleting pages can be performed with the USER MENU
CUSTOMIZE menu.
USER MENU CUSTOMIZE menu
This menu allows you to edit the USER menu.
For details on the USER menu, see "Editing the USER Menu"
on page 29.
ALL menu
This menu permits you to control all items of the OPERATION
menu, PAINT menu, MAINTENANCE menu, FILE menu, and
DIAGNOSIS menu as a single menu.
OPERATION menu
This menu contains items for camera operators to operate the
camera. It mainly permits viewfinder, intercom, and switch
settings.
PAINT menu
This menu contains items for making detailed image
adjustments while using a waveform monitor to monitor the
waveforms output from the camera. Support of a video
engineer is usually required to use this menu.
Although you can also use an external remote control panel or
master setup unit to set the items on this menu, the menu is
effective when using the camera by itself outdoors.
MAINTENANCE menu
This menu contains items for performing camera maintenance
operations, such as changing the system or setting
infrequently used "paint" items.
FILE menu
This menu is for performing file operations, such as writing or
clearing the reference file.
DIAGNOSIS menu
This menu enables you to confirm the self-diagnostic
information.
To select a menu on the TOP MENU screen
1
Rotate the MENU SEL knob/ENTER button to align the
arrow marker ( ) with the desired menu indication.
,
2
Push on the MENU SEL knob/ENTER button.
The CONTENTS page or the last operated page of the
selected menu is displayed.

Selecting Pages

When selecting a page from a CONTENTS
page
Example: CONTENTS page of the OPERATION menu
If the screen can be scrolled, arrows will
indicate the direction of scrolling.
CONTENTS
01.<VF DISPLAY>
02.<'!'IND>
03.<VF MARKER>
, marker
04.<VF DETAIL>
05.<FOCUS POSITION METER1
06.<FOCUS POSITION METER2
07.<FOCUS ASSIST>
08.<VF DYNAMIC CONTRAST>
09.<ZEBRA>
10.<CURSOR>
Rotate the MENU SEL knob/ENTER button to align the arrow
marker ( ) with the desired page indication, then push on the
,
MENU SEL knob/ENTER button.
The selected page is displayed.
<VF DETAIL>
VF DETAIL :
CRISP
FREQUENCY:
FLICKER
AREA
ZOOM LINK:
COLOR DETAIL :
PEAK COLOR
CHROMA LEVEL: 100%
To change the displayed page
1
Check that the arrow marker (
of the page number, then push on the MENU SEL
knob/ENTER button.
The arrow marker (
,
mark.
<VF DETAIL>
VF DETAIL :
CRISP
FREQUENCY:
FLICKER
AREA
ZOOM LINK:
COLOR DETAIL :
PEAK COLOR
CHROMA LEVEL: 100%
27
00 TOP
Page number
04 TOP
ON 25%
: 0
9M
: OFF
: 70%
ON 100%
ON BLUE
: ON
) is located at the left
,
) changes to a flashing question (?)
Flashes
? 04 TOP
ON 25%
: 0
9M
: OFF
: 70%
ON 100%
ON BLUE
: ON