Matrix Cosec Argo F0I212 Quick Installation Manual page 13

Diode connection for Back EMF Protection
Cathode
+
Power
-
Anode
GND
Connect the Overswing diode in reverse biased condition
parallel to the EM Lock for a better contact lifetime and
to protect the Device from the Inductive kickback.
25
Disposal Of Product After End-Of-Life
WEEE Directive 2002/96/EC
The product refered is covered by the waste Electrical
and Electronic Equipment (WEEE) directive and must be
EM
disposed of in a responsible manner.
Lock
Reverse biased
Diode
At the end of product life cycle; batteries, soldered
boards, metal components and plastic components must
be disposed through recyclers.
If you are unable to dispose-off the products or unable to
locate e-waste recyclers, you may return the products to
Matrix Return Material Authorization (RMA) department.
26