Training Mode - Samsung ER-550 Operator's And Programming Manual

Training Mode

A training mode is available so that you can operate the cash register without updating totals and
counters. Note the following conditions:



To Enter Training Mode
1. Turn the Control lock to the MANAGER position. The MANAGER MODE menu displays:
2. Press 5 to display the ENTER/EXIT TRAINING screen.
3. Enter the four digit password (the password must be programmed to use training mode), press
ENTER (CASH/TEND). The MANAGER MODE screen returns. The register is now in
training mode.
80  Manager Functions
The message "TRAINING MODE" prints on each receipt printed while training mode is
active.
For security, you can set a 4 digit password that is required to enter or exit training mode.
See page 5 of "System Option Programming" on page 101 to set this password.
The total and counter on the financial report labeled "TRAIN TTL" is updated with the
net amount of each training transaction.
MANAGER MODE
0.PRINT REPORTS
1.DISPLAY REPORTS
2.PERFORM DECLARA.
3.REG. PRINT FORMAT
4.STOP REG PRINTING
5.TRAINING MODE
ENTER/EXIT TRAINING
REGIST. IS CURRENTLY
NOT IN TRAINING
TO ENTER TRAINING,
ENTER 4 DIGIT PASSWD
AND PRESS ENTER
Samsung ER-550 Electronic Cash Register